Command Line Reference Guide

Virtual Router Redundancy Protocol (VRRP) | 1065

Virtual Router Redundancy Protocol (VRRP)

Overview

Virtual Router Redundancy Protocol (VRRP) commands are supported on all platforms:

c, e, and s.

To enter the VRRP mode on an interface, use the vrrp-group command at the INTERFACE mode. The

interface must be in Layer 3 mode. You can configure up to 12 VRRP groups on one interface.

For configuration details, see the VRRP chapter in the FTOS Configuration Guide.

Commands

The commands are:

• advertise-interval

• authentication-type

• clear counters vrrp

• debug vrrp

• description

• disable

• hold-time

• preempt

• priority

• show config

• show vrrp

• track

• virtual-address

• vrrp-group

advertise-interval

c e s

Set the time interval between VRRP advertisements.

Syntax

advertise-interval seconds

To return to the default settings, enter no advertise-interval.