Command Line Reference Guide

106 | Control and Monitoring
www.dell.com | support.dell.com
Example 2
Figure 4-26. Example Output of show inventory media (S-Series)
Related
Commands
show linecard
c e
Display the line card(s) status.
Syntax
show linecard [number [brief] | all]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
S50V_7.7#show inventory media ?
<0-7> Slot number
| Pipe through a command
<cr>
S50V_7.7#show inventory media
Slot Port Type Media Serial Number F10Qualified
------------------------------------------------------------------------------
0 49 Media not present or accessible
0 50 XFP 10GBASE-SR C707XS0MD Yes
0 45 Media not present or accessible
0 46 Media not present or accessible
0 47 Media not present or accessible
0 48 Media not present or accessible
0 51 Media not present or accessible
0 52 Media not present or accessible
S50V_7.7#
show interfaces interface configuration.
show interfaces
transceiver
Display the physical status and operational status of an installed transceiver. The
output also displays the transceiver’s serial number.
number
(OPTIONAL) Enter a slot number to view information on the line card in that slot.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.
all
(OPTIONAL) Enter the keyword all to view a table with information on all present line
cards.
brief
(OPTIONAL) Enter the keyword brief to view an abbreviated list of line card
information.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
E-Series original Command