Command Line Reference Guide

1052 | Time and Network Time Protocol (NTP)
www.dell.com | support.dell.com
Example
Figure 43-4. show clock Command Example
Example
Figure 43-5. show clock detail Command Example
Related
Commands
show ntp associations
c e s
Display the NTP master and peers.
Syntax
show ntp associations
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 43-6. show ntp associations Command Example
Force10#show clock
11:05:56.949 UTC Thu Oct 25 2001
Force10#
Force10#show clock detail
12:18:10.691 UTC Wed Jan 7 2009
Time source is RTC hardware
Summer time starts 02:00:00 UTC Sun Mar 8 2009
Summer time ends 02:00:00 ABC Sun Nov 1 2009
Force10#
clock summer-time recurring Display the time and date from the switch hardware clock.
show calendar Display the time and date from the switch hardware clock.
Version 8.3.5.0 Introduced on S55
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
Force10#show ntp associations
remote ref clock st when poll reach delay offset disp
==========================================================================
10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
*172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9 104.16
172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
* master (synced), # master (unsynced), + selected, - candidate
Force10#