Command Line Reference Guide

Control and Monitoring | 105
show inventory (S-Series)
s
Display the S-Series switch type, components (including media), FTOS version including hardware
identification numbers and configured protocols.
Syntax
show inventory [media slot]
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION
Command
History
Usage
If there are no fiber ports in the unit, then just the header under show inventory media will be
displayed. If there are fiber ports but no optics inserted, then the output will display "Media not present
or accessible".
Example 1
Figure 4-25. Example output of show inventory for S-Series
media slot (OPTIONAL) Enter the keyword media followed by the stack ID of the stack member
for which you want to display pluggable media inventory.
Version 8.3.5.0 Introduced on the S55.
Version 7.6.1.0 Introduced this version of the command for S-Series. S-Series output differs from
E-Series.
FTOS #show inventory
System Type : S4810
System Mode : 1.0
Software Version : E8-3-12-2
Unit Type Serial Number Part Number Rev Piece Part ID Rev Svc Tag Exprs Svc Code
------------------------------------------------------------------------------- ------------------------------
* 2 S4810-01-64F HADL123J20113 7590009602 A N/A N/A N/A N/A
2 S4810-PWR-AC H6DL123J20113 7590008502 A N/A N/A N/A N/A
2 S4810-FAN N/A N/A N/A N/A N/A N/A N/A
2 S4810-FAN N/A N/A N/A N/A N/A N/A N/A
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
FTOS#