Command Line Reference Guide

Control and Monitoring | 103
Usage
Information
The show inventory media command provides some details about installed pluggable media (SFP,
XFP), as shown in Figure 4-23. Use the show interfaces command to get more details about
installed pluggable media.
The display output might include a double asterisk (**) next to the SFMs, for example:
...
0 CC-E-SFM ** 0004875 7490007411 A
1 CC-E-SFM ** 0004889 7490007411 A
...
The double asterisk generally indicates the SFM’s frequency capabilities, indicating either that they are
operating at 125 MHz or that the frequency capability, which is stored in an EPROM, cannot be
determined.
If there are no fiber ports in the line card, then just the header under show inventory media will be
displayed. If there are fiber ports but no optics inserted, then the output will display "Media not present
or accessible".
C300 Example
Figure 4-21. Example output of show inventory for C300 (C-Series)
Force10# show inventory
Chassis Type : C300
Chassis Mode : 1.0
Software Version : FTOS-EF-7.6.1.0
Slot Item Serial Number Part Number Revision
--------------------------------------------------------------
C300 TY000001400 7520029999 04
3 LC-CB-GE-48T FX000020075 7520036700 01
0 LC-CB-RPM 0060361 7520029300 02
0 CC-C-1200W-AC N/A N/A N/A
1 CC-C-1200W-AC N/A N/A N/A
0 CC-C300-FAN
* - standby
Software Protocol Configured
--------------------------------------------------------------
OSPF
Force10#