Command Line Reference Guide

S-Series Stacking Commands | 1027
upgrade system stack-unit (S-Series stack member)
s
Copy the boot image or FTOS from the management unit to one or more stack members.
Syntax
upgrade {boot | system} stack-unit {all | stack-unit}
Parameters
Defaults
No configuration or default values
Command Modes
EXEC
Command
History
Usage
Information
You must reload FTOS after using the upgrade command.
Related
Commands
upgrade system stack-unit (S55 stack member)
s
Copy the boot image or FTOS from the management unit to one or more stack members.
Syntax
upgrade {boot | system} {flash: | ftp: | scp: | S55} stack-unit {all | stack-unit}
Parameters
boot
Enter this keyword to copy the boot image from the management unit to the
designated stack members.
system
Enter this keyword to copy the FTOS image from the management unit to the
designated stack members.
all
Enter this keyword to copy the designated image to all stack members.
stack-unit
Enter the stack member unit identifier of the stack member to reset.
S55 range: 0 - 11
Version 7.7.1.0 Introduced on S-Series
reload Reboot FTOS.
reset stack-unit Reset the designated S-Series stack member.
show system (S-Series) Display the current status of all stack members or a specific member.
show version Display the current FTOS version information on the system.
upgrade (S-Series management
unit)
Upgrade the bootflash image or system image of the S-Series management
unit.
boot
Enter this keyword to copy the boot image from the management unit to the
designated stack members.
system
Enter this keyword to copy the FTOS image from the management unit to the
designated stack members.
flash:
Enter this keyword to copy the designated image to the flash drive on the stack
members.
ftp:
Enter this keyword to copy the designated image via ftp to the stack members.
scp:
Enter this keyword to copy the designated image via scp to the stack members.
S55
Enter the system identifier (S55) of the stack member being upgraded.