Command Line Reference Guide

S-Series Stacking Commands | 1025
Related
Commands
stack-unit priority
s
Configure the ability of an S-Series switch to become the management unit of a stack.
Syntax
stack-unit stack-unit priority preference
Parameters
Defaults
1
Command Modes
CONFIGURATION
Command
History
Related
Commands
stack-unit provision
s
Pre-configure a logical stacking ID of a switch that will join the stack. This is an optional command
that is executed on the management unit.
Syntax
stack-unit stack-unit provision {S25N | 25P | S25V | S50N | S50V | S55}
Parameters
Defaults
When this value is not set, a switch joining the stack is given the next available sequential stack
member identifier.
reset stack-unit Reset the designated S-Series stack member.
show hardware stack-unit Display the data plane or management plane input and output statistics of the
designated component of the designated stack member.
show system (S-Series) Display the current status of all stack members or a specific member.
upgrade (S-Series
management unit)
Upgrade the bootflash image or system image of the S-Series management
unit.
stack-unit
Enter the stack member unit identifier of the stack member to reset.
S55 range: 0 - 11
preference
This preference parameter allows you to specify the management priority of one backup
switch over another,
Range 1-14, with 1 the lowest priority and 14 the highest.
The switch with the highest priority value will be chosen to become the management unit if
the active management unit fails or on the next reload.
Version 8.3.5.1 Introduced on S55
Version 7.7.1.0 Introduced on S-Series
reload Reboot FTOS.
show system (S-Series) Display the current status of all stack members or a specific member.
stack-unit
Enter the stack member unit identifier of the stack member to reset.
S55 range: 0 - 11
S25N|S25P|S25V||
S50N|S50V|S55
Enter the S-Series model identifier of the switch to be added as a stack member. This
identifier is also referred to as the provision type.
Note: The S55 does not support stacking with any other platform