Command Line Reference Guide

102 | Control and Monitoring
www.dell.com | support.dell.com
Example
Figure 4-18. Command Example: show environment pem
Example
Figure 4-19. Command Example: show environment stack-unit
Example
Figure 4-20. Command Example: show environment thermal-sensor
show inventory (C-Series and E-Series)
c e
Display the chassis type, components (including media), FTOS version including hardware
identification numbers and configured protocols.
Syntax
show inventory [media slot]
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION
Command
History
Force10#show environment pem
-- Power Supplies --
Unit Bay Status Type
---------------------------------------------------------------------------
0 0 up AC
0 1 absent
Force10#show environment stack-unit 0
-- Unit Environment Status --
Unit Status Temp Voltage
---------------------------------------------------------------------------
0* online 49C ok
* Management Unit
Force10#show environment thermal-sensor
-- Thermal Sensor Readings (deg C) --
Unit Sensor0 Sensor1 Sensor2 Sensor3 Sensor4 Sensor5
---------------------------------------------------------------------------
0 30 33 36 30 30 32
Force10#
media slot (OPTIONAL) Enter the keyword media followed by the slot number.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Output expanded to include SFP+ media in C-Series.
Version 7.7.1.0
Vendor field removed from output of
show inventory media.
Version 7.5.1.0 Introduced on C-Series and expanded to include transceiver media
Version 6.2.1.0 Expanded to include Software Protocol Configured field on E-Series
Version 5.3.1.0 Introduced on E-Series