Command Line Reference Guide
1018 | S-Series Stacking Commands
www.dell.com | support.dell.com
Examples
Figure 41-1. Using the reset stack-unit Command on the Stack Standby Unit (S55)
Force10#reset stack-unit 0
% Error: Reset of master unit is not allowed.<<Resetting master not allowed
Force10#
Force10#reset stack-unit 11 ?
hard Hard reset (power cycle)
<cr>
Force10#reset stack-unit 11 <<Resetting a stack unit
00:10:33: %STKUNIT0-M:CP %CHMGR-5-STACKUNIT_RESET: Stack unit 11 being reset
00:10:33: %STKUNIT0-M:CP %IFMGR-1-DEL_PORT: Removed port: Gi 11/0-47
00:10:35: %STKUNIT0-M:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 11 down - reset
Force10#00:10:36: %STKUNIT7-S:CP %IFMGR-1-DEL_PORT: Removed port: Gi 11/0-47
00:10:40: %S55:0 %IFAGT-5-STACK_PORT_LINK_DOWN: Changed stack port state to down:
0/48
Force10(standby)# <<Standby Unit
Force10(standby)#
Force10(standby)#reset stack-unit 0
% Error: Reset of master unit is not allowed. Resetting master not allowed
Force10(standby)#
Force10(standby)#reset stack-unit 2
% Error: Reset of stack units from standby is not allowed.
Force10(standby)#
Force10(standby)#reset stack-unit 1 <<Resetting standby unit sucess!!
01:24:48: %STKUNIT1-S:CP %CHMGR-5-STACKUNIT_RESET: Stack unit 1 being reset
01:24:48: %STKUNIT1-S:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 1 down - reset
01:24:48: %STKUNIT1-S:CP %IFMGR-1-DEL_PORT: Removed port: Gi 1/0-47
Force10(standby)#syncing disks... done
rebooting
Force10(stack-member-2)#reset-self
Going for reboot. Reason is Stack-Unit Hard Reset
syncing disks... done
rebooting
Reset System..
---------------------------------------------------------------------------------
------
Force10#upgrade system ftp://ftp:ftp@10.16.127.50/tftpboot/FTOS-SD-8-3-5-36.bin
A:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Erasing Sseries Primary Image, please wait
.!...............................................................................
.................................................................................
.................................................................................
.................................................................................
.................................!
21677102 bytes successfully copied
Upgrade system image for all stack-units [yes/no]: yes
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!
Force10#
Cannot reset from
the standby unit