Command Line Reference Guide

Control and Monitoring | 101
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 4-16. Command Example: show environment on the S55
Example
Figure 4-17. Command Example: show environment fan
pem Enter the keyword pem to view only information on power entry modules.
thermal-sensor Enter the keyword thermal-sensor to view only information on the thermal
sensors.
Version 8.3.5.0 Introduced on the S55.
Version 7.8.1.0
The output of the
show environment fan command for S-Series is changed to
display fan speeds instead of just showing the fan status as up or down.
Version 7.6.1.0 Introduced for S-Series. S-Series options and output differ from the
C-Series/E-Series version.
Force10#show environment
-- Fan Status --
Status Temp Fan1 Fan2 Fan3 Serial Num Version
---------------------------------------------------------------------------
up 32C 6000 RPM 6000 RPM 7500 RPM FX000040889 3.2
-- Power Supplies --
Bay Status
---------------------------------------------------------------------------
0 absent
1 up
2 up
3 up
-- Line Card Environment Status --
Slot Status Temp Voltage
---------------------------------------------------------------------------
0 not present
1 online 66C ok
2 not present
3 online 59C ok
4 online 64C ok
5 not present
6 online 59C ok
-- RPM Environment Status --
Slot Status Temp Voltage
---------------------------------------------------------------------------
0 active 36C ok
1 not present
-- SFM Environment Status --
Force10#
Force10#show environment fan
-- Fan Status --
Status Temp Fan1 Fan2 Fan3 Serial Num Version
---------------------------------------------------------------------------
up 32C 6000 RPM 6000 RPM 6000 RPM FX000040889 3.2