Reference Guide

IPv4 Routing | 559
Table 16-7. show ip cam Command Example Fields
Field Description
Index Displays the CAM index number of the entry.
Destination Displays the destination route of the index.
EC Displays the number of equal cost multipaths (ECMP) available for the default route for
non-Jumbo line cards.
Displays 0,1 when ECMP is more than 8, for Jumbo line cards.
CG Displays 0.
V Displays a 1 if the entry is valid and a 0 if the entry is for a line card with Catalog number
beginning with LC-EF.
C Displays the CPU bit.
1 indicates that a packet hitting this entry is forwarded to the CP or RP2, depending on
Egress port.
Next-Hop Displays the next hop IP address of the entry.
VId Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN.
Mac Addr Displays the next-hop router’s MAC address.
Port Displays the egress interface. Use the second half of the entry to determine the interface.
For example, in the entry 17cl CP, the CP is the pertinent portion.
CP = control processor
RP2 = route processor 2
Gi = Gigabit Ethernet interface
So = SONET interface
Te = 10 Gigabit Ethernet interface