Reference Guide

714 | Stacking S-Series Switches
www.dell.com | support.dell.com
Display Information about an S-Series Stack
Task Command Syntax Command Mode
Display for stack-identity, status, and
hardware information on every unit in a
stack (Figure 39-17).
show system
EXEC Privilege
Display most of the information in
show
system
, but in a more convenient tabular
form (Figure 39-18).
show system brief
EXEC Privilege
Display the same information in
show
system
, but only for the specified unit
(Figure 39-18).
show system stack-unit <stack-unit>
EXEC Privilege
Display topology and stack link status for
the entire stack. The available options
separate the
show system stack-port
output into topology information from link
status information (Figure 39-18).
show system stack-ports [status | topology] EXEC Privilege