Reference Guide

IPv6 Addressing | 345
Table 17-2. FTOS and IPv6 Feature Support
Feature and/or
Functionality FTOS Release Introduction Documentation and Chapter Location
E-Series
TeraScale
E-Series
ExaScale C-Series S-Series
Basic IPv6 Commands 7.4.1 8.2.1 7.8.1 7.8.1 IPv6 Basic Commands in the FTOS Command
Line Interface Reference Guide
IPv6 Basic Addressing
IPv6 address types:
Unicast
7.4.1 8.2.1 7.8.1 7.8.1 Extended Address Space in this chapter
IPv6 neighbor discovery 7.4.1 8.2.1 7.8.1 7.8.1 IPv6 Neighbor Discovery in this chapter
IPv6 stateless
autoconfiguration
7.4.1 8.2.1 7.8.1 7.8.1 Stateless Autoconfiguration in this chapter
IPv6 MTU path
discovery
7.4.1 8.2.1 7.8.1 7.8.1 Path MTU Discovery in this chapter
IPv6 Routing
Static routing 7.4.1 8.2.1 7.8.1 7.8.1 Assign a Static IPv6 Route in this chapter
Route redistribution 7.4.1 8.2.1 7.8.1 OSPF, IS-IS, and IPv6 BGP chapters in the
FTOS Command Line Reference Guide
Multiprotocol BGP
extensions for IPv6
7.4.1 8.2.1 7.8.1 IPv6 BGP in the FTOS Command Line
Reference Guide
IPv6 BGP MD5
Authentication
8.2.1.0 8.2.1.0 8.2.1.0 IPv6 BGP in the FTOS Command Line
Reference Guide
OSPF for IPv6 (OSPFv3) 7.4.1 8.2.1 7.8.1 OSPFv3 in the FTOS Command Line
Reference Guide
Equal Cost Multipath for
IPv6
7.4.1 8.2.1 7.8.1 7.8.1
IPv6 Services and Management
Telnet client over IPv6
(outbound Telnet)
7.5.1 8.2.1 7.8.1 7.8.1 Telnet with IPv6 in this chapter
Control and Monitoring in the FTOS Command
Line Reference Guide
Telnet server over IPv6
(inbound Telnet)
7.4.1 8.2.1 7.8.1 7.8.1 Telnet with IPv6 in this chapter
Control and Monitoring in the FTOS Command
Line Reference Guide
Secure Shell (SSH) client
support over IPv6
(outbound SSH) Layer 3
only
7.5.1 8.2.1 7.8.1 7.8.1 SSH over an IPv6 Transport in this chapter