Command Reference Guide

Link Layer Discovery Protocol (LLDP) | 965
Command Modes
EXEC Privilege
Command
History
Example
FTOS#show running-config lldp
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
hello 15
multiplier 3
no disable
FTOS#
LLDP-MED Commands
The LLDP-MED commands in this section are:
• advertise med guest-voice
• advertise med guest-voice-signaling
• advertise med location-identification
• advertise med power-via-mdi
• advertise med softphone-voice
• advertise med streaming-video
• advertise med video-conferencing
• advertise med video-signaling
• advertise med voice
• advertise med voice-signaling
FTOS LLDP-MED (Media Endpoint Discovery) commands are an extension of the set of
LLDP TLV advertisement commands. The C-Series and S-Series support all commands, as
indicated by these symbols underneath the command headings:
c s
The E-Series generally supports the commands, too, as indicated by the e symbol under
command headings. However, LLDP-MED commands are more useful on the C-Series and
the S50V model of the S-Series, because they support Power over Ethernet (PoE) devices.
As defined by ANSI/TIA-1057, LLDP-MED provides organizationally specific TLVs (Type
Length Value), so that endpoint devices and network connectivity devices can advertise their
characteristics and configuration information. The Organizational Unique Identifier (OUI) for
the Telecommunications Industry Association (TIA) is 00-12-BB.
• LLDP-MED Endpoint Device — any device that is on an IEEE 802 LAN
network edge, can communicate using IP, and uses the LLDP-MED framework.
Version 7.7.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series