Command Reference Guide

Layer 2 | 941
show vlan
c e s
Display the current VLAN configurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, P - Primary, C - Community, I - Iso-
lated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM Status Description Q Ports
* 1 Inactive
2 Active U Po1(Gi 13/0)
T Po20(Gi 13/6), Gi 13/25
T Gi 13/7
3 Active T Po20(Gi 13/6)
T Gi 13/7
U Gi 13/1
4 Active U Po2(Gi 13/2)
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
brief
(OPTIONAL) Enter the keyword brief to display the following information:
• VLAN ID
• VLAN name (left blank if none is configured.)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Only
information on the VLAN specified is displayed.
name
vlan-name
(OPTIONAL) Enter the keyword name followed by the name configured for the
VLAN. Only information on the VLAN named is displayed.
Version 8.3.7.0 Introduced on S4810
Version 7.8.1.0 Augmented to display PVLAN data for C-Series and S-Series; revised
output to include Description field to display user-entered VLAN
description
Version 7.6.1.0 Introduced on S-Series; revised output to display Native VLAN
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series