Command Reference Guide

Layer 2 | 923
Parameters
Defaults
No default behavior or values
Command Modes
INTERFACE (conf-if-interface-slot/port)
Command
History
Usage
Information
This is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
mac learning-limit mac-address-sticky
Maintain the dynamically-learnt mac addresses as sticky MAC addresses on the selected port.
Syntax
mac learning-limit mac-address-sticky
Use the ‘no’ form of this command to convert the sticky MAC addresses to dynamic MAC
addresses.
Parameters
Defaults
No default behavior or values.
Command Modes
INTERFACE
Command
History
Usage
Information
If mac-learn-limit is configured and the sticky MAC feature is enabled, dynamically-learned
MAC addresses are converted to sticky for that port. Any new MAC address that is learned
also becomes sticky for that port.
Related
Commands
log
Enter the keyword log to generate a syslog message on a
learning-limit violation.
shutdown
Enter the keyword shutdown to shut down the port on a
learning-limit violation.
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on S-Series
Version 7.8.1.0 Introduced on C-Series
Version 7.5.1.0 Introduced on E-Series
show mac learning-limit Display details of the mac learning-limit
mac-address-sticky
Configures the dynamic MAC addresses as sticky on an interface.
Version 8.3.12.0 Introduced on S4810
show mac learning-limit Display details of the mac learning-limit