Command Reference Guide

84 | Control and Monitoring
www.dell.com | support.dell.com
Command
History
Usage
Information
You must also configure a password with the ip ftp password command.
Related
Commands
ip telnet server enable
c e s
Enable the Telnet server on the switch.
Syntax
ip telnet server enable
To disable the Telnet server, execute the no ip telnet server enable command.
Defaults
Enabled
Command Modes
CONFIGURATION
Command
History
Related
Commands
ip telnet source-interface
c e s
Set an interface’s IP address as the source address in outgoing packets for Telnet sessions.
Syntax
ip telnet source-interface interface
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
ip ftp password Set the password for FTP connections.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Introduced on C-Series
Version 6.1.1.0 Introduced on E-Series
ip ssh server
Enable SSH server on the system.