Command Reference Guide

832 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Syntax
debug ip bgp ipv6 unicast peer-group peer-group-name updates [in | out]
To disable debugging, enter
no debug ip bgp ipv6 unicast peer-group peer-group-name updates
[
in | out] command.
Parameters
Command Modes
EXEC Privilege
Command
History
debug ip bgp ipv6 unicast updates
c e
View information about BGP updates.
Syntax
debug ip bgp ipv6 unicast ipv6-address prefix-length updates [in | out]
To disable debugging, enter
no debug ip bgp ipv6 unicast ipv6-address prefix-length updates [in |
out
] command.
Parameters
Defaults
Disabled.
Command Modes
EXEC Privilege
Command
History
peer-group
peer-group-name
Enter the keyword peer-group followed by the name of the
peer-group.
updates
Enter the keyword updates to view BGP update information.
in
(OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out
(OPTIONAL) Enter the keyword out to view only BGP updates sent
to neighbors.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format.
Range: /0 to /128
The :: notation specifies successive hexadecimal fields of zeros
updates
Enter the keyword updates to view BGP update information.
in
(OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out
(OPTIONAL) Enter the keyword out to view only BGP updates sent
to neighbors.
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale