Command Reference Guide

830 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Defaults
Disabled.
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
clear ip bgp ipv6 unicast
c e
Reset MBGP sessions.
Syntax
clear ip bgp ipv6 unicast * ipv6-address prefix-length [dampening | flap-statistics] peer-group]
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip bgp ipv6 unicast dampening
c e
Clear information on route dampening.
Syntax
clear ip bgp dampening ipv6 unicast [network network-mask]
Parameters
Command Modes
EXEC Privilege
Command
History
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale
*
Enter the character * to clear all peers.
ipv6-address prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format.
Range: /0 to /128
The :: notation specifies successive hexadecimal fields of zeros
dampening
(OPTIONAL) Enter the keyword dampening to clear route flap
dampening information.
flap-statistics
(OPTIONAL) Enter the keyword flap-statistics to reset the flap
statistics on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keyword peer-group to clear all members
of a peer-group.
Version 8.4.2.0 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced
network
(OPTIONAL) Enter the IPv6 network address in x:x:x:x::x format.
network-mask If you enter the network address, then enter the network mask, from 0 to 128.
Version 8.4.2.1 Introduced on C-Series and S4810
Version 7.4.1.0 Introduced on E-Series TeraScale