Command Reference Guide

Control and Monitoring | 83
Parameters
Defaults
The IP address on the system that is closest to the Telnet address is used in the outgoing
packets.
Command Modes
CONFIGURATION
Command
History
Related
Commands
ip ftp username
c e s
Assign a user name for outgoing FTP connection requests.
Syntax
ip ftp username username
Parameters
Defaults
No user name is configured.
Command Modes
CONFIGURATION
interface Enter the following keywords and slot/port or number information:
• For an 100/1000 Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For Loopback interfaces, enter the keyword
loopback followed by a number
from zero (0) to 16383.
• For a Port Channel interface, enter the keyword
port-channel followed by a
number:
C-Series and S-Series: 1-128
E-Series: 1 to 255 for TeraScale and 1 to 512 for ExaScale
• For SONET interface types, enter the keyword sonet followed by the slot/
port information.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by
the slot/port information.
• For a VLAN interface, enter the keyword
vlan followed by a number from 1
to 4094.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.2.1.0 Increased number of VLANs on ExaScale to 4094 (was 2094)
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
copy Copy files from and to the switch.
username Enter a text string as the user name up to 40 characters long.