Command Reference Guide

IPv6 Border Gateway Protocol (IPv6 BGP) | 769
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGP
Command
History
Usage
Information
The autonomous systems configured in this command are visible to the EBGP neighbors.
Each autonomous system is fully meshed and contains a few connections to other
autonomous systems. The next hop, MED, and local preference information is preserved
throughout the confederation.
FTOS accepts confederation EBGP peers without a LOCAL_PREF attribute. The software
sends AS_CONFED_SET and accepts AS_CONFED_SET and AS_CONF_SEQ.
bgp confederation peers
c e
Specify the Autonomous Systems (ASs) that belong to the BGP confederation.
Syntax
bgp confederation peers as-number [...as-number]
To delete a BGP confederation peer, enter no bgp confederation peers
as-number
[...as-number].
Parameters
Defaults
Not configured.
Command Modes
ROUTER BGP
Command
History
Usage
Information
The Autonomous Systems configured in this command are visible to the EBGP neighbors.
Each Autonomous System is fully meshed and contains a few connections to other
Autonomous Systems.
as-number Enter the AS number.
Range: 1 to 65535
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale
as-number Enter the AS number.
Range: 1 to 65535
...as-number
(OPTIONAL) Enter up to 16 confederation numbers.
Range: 1 to 65535.
Version 8.4.2.1 Introduced on C-Series and S4810
Version 8.2.1.0 Introduced on E-Series ExaScale
Version 7.4.1.0 Introduced on E-Series TeraScale