Command Reference Guide

IPv6 Basics | 753
EXEC Privilege
Command
History
Usage
Information
Host tables are not stored in CAM tables on S-Series platforms. Entries for camIndex will
display as zero (0) on the
show ipv6 fib stack-unit output for neighbor entries, such as ARP
entries.
show ipv6 flowlabel-zero
Display the flow label zero setting.
Syntax
show ipv6 flowlabel-zero
Default
Disabled
Command Mode
EXEC
Command
History
Related
Commands
show ipv6 interface
c e s
Display the status of interfaces configured for IPv6.
Syntax
show ipv6 interface interface [brief] [configured] [gigabitethernet slot | slot/port] [linecard
slot-number] [loopback interface-number] [managementethernet slot/port] [port-channel number]
[tengigabitethernet
slot | slot/port] [fortyGigE slot | slot/port][vlan vlan-id]
Parameters
Version 8.3.7.0 Introduced on the S4810
Version 8.4.2.1 Introduced on S-Series
Version 8.3.12.0 Introduced on the S4810.
ipv6 nd dad attempts Configure system to set the flow label field in the packets to zero.
interface (OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Loopback interface, enter the keyword Loopback followed
by a number from 0 to 16383.
• For the Null interface, enter the keyword null followed by zero
(0).
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE
followed by the slot/port information.
• For a VLAN interface, enter the keyword VLAN.
• For a port channel interface, enter the keyword port-channel.
brief
(OPTIONAL) View a summary of IPv6 interfaces.
configured
(OPTIONAL) View information on all IPv6 configured interfaces