Command Reference Guide

IPv6 Access Control Lists (IPv6 ACLs) | 729
Defaults
Not configured.
Command Modes
ACCESS-LIST
Command
History
Related
Commands
show cam-acl
c e s
Show space allocated for IPv6 ACLs.
Syntax
show cam-acl
Command Modes
EXEC
EXEC Privilege
Command
History
Related
Commands
Example
(default profile)
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 6
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 5
log
(OPTIONAL) Enter the keyword log to enter ACL matches in the log.
Supported on Jumbo-enabled line cards only.
monitor
(OPTIONAL) Enter the keyword monitor to monitor traffic on the
monitoring interface specified in the flow-based monitoring session
along with the filter operation.
Version 8.4.2.1 Introduced on the E-Series TeraScale and S-Series
Version 8.2.1.0 Introduced on the E-Series ExaScale
Version 7.8.1.0 Introduced on the C-Series
Version 7.4.1.0 Added monitor option
deny Configure a filter to drop packets.
permit Configure a filter to forward packets.
Version 8.3.7.0 Introduced support on the S4810
Version 8.4.2.1 Introduced on the S-Series
Version 8.4.2.0 Introduced on the E-Series TeraScale
Version 7.8.1.0 Introduced on the C-Series
cam-acl Configure CAM profiles to support IPv6 ACLs