Command Reference Guide

IPv4 Routing | 695
c e s
View information on all routing protocols enabled and active on the switch.
Syntax
show ip protocols
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show ip protocols
Routing Protocol is "bgp 1"
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
FTOS#
show ip route
c e s
View information, including how they were learned, about the IP routes on the switch.
Syntax
show ip route [vrf [vrf name] hostname | ip-address [mask] [longer-prefixes] | list prefix-list |
protocol [process-id | routing-tag] | all | connected | static | summary]
Parameter
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Regular evaluation optimization enabled/disabled added to display output
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.0 Introduced for E-Series
vrf name E-Series Only: Clear only the route entries tied to the VRF process.
ip-address (OPTIONAL) Specify a name of a device or the IP address of the device
to view more detailed information about the route.
mask
(OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
longer-prefixes
(OPTIONAL) Enter the keyword longer-prefixes to view all routes
with a common prefix.