Command Reference Guide

IPv4 Routing | 689

Command Mode

EXEC

EXEC Privilege

Command

History

Example

FTOS#show ip fib stack-unit 0

Destination Gateway First-Hop Mac-Addr Port VId EC

------------------ --------------------------- -----------------

------------------- -------- ----- --

10.10.10.10/32 Direct, Nu 0 0.0.0.0

00:00:00:00:00:00 BLK HOLE 0 0

FTOS>

Commands

show ip flow

Version 8.3.7.0 Introduced on S4810

Version 7.7.1.0 Modified: Added support for up to seven stack members.

Version 7.6.1.0 Introduced on S-Series

Table 23-11. show ip fib linecard Command Example Fields

Field Description

Destination Lists the destination IP address.

Gateway

Displays either the word Direct and an interface for a directly connected route or

the remote IP address to be used to forward the traffic.

First-Hop Displays the first hop IP address.

Mac-Addr Displays the MAC address.

Port Displays the egress-port information.

VId Displays the VLAN ID. If no VLAN is assigned, zero (0) is listed.

EC Displays the number of ECMP paths.

clear ip fib linecard Clear FIB entries on a specified line card.