Command Reference Guide

IPv4 Routing | 685
22 0 2622
21 0 2622
20 0 2622
19 0 2622
18 0 1312
17 0 1312
16 0 3932
15 0 1312
14 0 1312
13 0 1312
12 0 1312
11 0 1312
10 0 1312
9 0 1312
8 0 1312
7 0 1312
6 0 1312
5 0 1312
4 0 1312
3 0 1312
2 0 1312
1 0 1312
0 0 8
FTOS#
show ip cam stack-unit
s
Display content-addressable memory (CAM) entries for an S-Series switch.
Syntax
show ip cam stack-unit 0-7 port-set pipe-number [ip-address mask [longer-prefixes] | detail |
member-info | summary]
Parameters
Table 23-8. show ip cam summary Command Example Fields
Field Description
Prefix Length Displays the prefix-length or mask for the IP address configured on the linecard 0
port pipe 0.
Current Use Displays the number of routes currently configured for the corresponding prefix or
mask on the linecard 0 port pipe 0.
Initial Size Displays the CAM size allocated by FTOS for the corresponding mask. The CAM
size is adjusted by FTOS if the number of routes for the mask exceeds the initial
allocation.
0-7 Enter the stack-unit ID, from 0 to 7.
pipe-number Enter the number of the Port-Pipe number.
S50n, S50V range: 0 to 1; S25N, S25P, S25V range: 0 to 0
ip-address mask
[longer-prefix]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for
that route only.
Enter the keyword longer-prefixes to view routes with a common prefix.
detail
Enter the keyword detail to display the group index ID used by the ecmp
routes in the CAM.