Command Reference Guide

62 | File Management
www.dell.com | support.dell.com
Related
Commands
upgrade fpga-image
c
Upgrade the primary FPGA image.
Syntax
upgrade fpga-image {rpm {number | all}| linecard {number | all} [system-fpga | link-fpga] | all}
{
booted | file-url}
Parameters
Defaults
None.
Command Mode
EXEC Privilege
Command
History
reset Reset a card.
rpm number
Enter rpm followed by the RPM slot number to upgrade an RPM
FPGA
Range: 0-1
linecard number
Enter linecard followed by the line card slot number to upgrade a
linecard FPGA.
Range: 0-7 on the C300, 0-3 on the C150
all
Enter the keyword all to upgrade all RPM and linecard FPGAs.
Enter the keyword all after the keyword rpm to upgrade all FPGAs
on all RPMs.
Enter the keyword all after the keyword linecard to upgrade all
FPGAs on all linecards.
system-fpga (OPTIONAL) Enter system-fpga to upgrade only the system
FPGA on a fiber linecard. Contact the Dell Force10 TAC before
using this keyword.
link-fpga (OPTIONAL) Enter link-fpga to upgrade only the link FPGA on a
fiber linecard. Contact the Dell Force10 TAC before using this
keyword.
booted Upgrade the FPGA image using the currently running FTOS image.
file-url
Enter the following location keywords and information to upgrade
the FPGA using an FTOS image other than the one currently
running:
• To specify an FTOS image on the internal flash, enter flash://
file-path/filename.
• To specify an FTOS image on an FTP server, enter ftp://
user:password@hostip/filepath
• To specify an FTOS image on the external flash on the primary
RPM, slot0://file-path/filename
• To copy a file on a TFTP server, enter tftp://hostip/filepath/
filename
Version 7.7.1.0 Renamed the primary-fpga-flash keyword to fpga-image. Added support for
upgrading using a remote FTOS image.
Version 7.6.1.0 Added support for the all keyword
Version 7.5.1.0 Introduced on C-Series