Command Reference Guide

Interfaces | 591
Example
(All Interfaces on
a Line Card)
systest-3 Monitor time: 00:01:31 Refresh Intvl.: 2s Time: 03:54:14
Interface Link In Packets [delta] Out Packets
[delta]
Gi 0/0 Down 0 0 0
0
Gi 0/1 Down 0 0 0
0
Gi 0/2 Up 61512 52 66160
42
Gi 0/3 Up 63086 20 9405888
24
Gi 0/4 Up 14697471418 2661481 13392989657
2661385
Gi 0/5 Up 3759 3 161959604
832816
Gi 0/6 Up 4070 3 8680346
5
Gi 0/7 Up 61934 34 138734357
72
Gi 0/8 Up 61427 1 59960
1
Gi 0/9 Up 62039 53 104239232
3
Gi 0/10 Up 17740044091 372 7373849244
79
Gi 0/11 Up 18182889225 44 7184747584
138
Gi 0/12 Up 18182682056 0 3682
1
Gi 0/13 Up 18182681434 43 6592378911
144
Gi 0/14 Up 61349 55 86281941
15
Gi 0/15 Up 59808 58 62060
27
Gi 0/16 Up 59889 1 61616
1
Gi 0/17 Up 0 0 14950126
81293
Gi 0/18 Up 0 0 0
0
Gi 0/19 Down 0 0 0
0
Gi 0/20 Up 62734 54 62766
18
Gi 0/21 Up 60198 9 200899
9
Gi 0/22 Up 17304741100 3157554 10102508511
1114221
Gi 0/23 Up 17304769659 3139507 7133354895
523329
m - Change mode c - Clear screen
b - Display bytes r - Display pkts/bytes per sec
l - Page up a - Page down
T - Increase refresh interval t - Decrease refresh interval
q - Quit
Table 22-2. monitor Command Menu Options
Key Description
systest-3 Displays the host name assigned to the system.
monitor time Displays the amount of time since the monitor interface command was entered.
time Displays the amount of time the chassis is up (since last reboot).
m Change the view from a single interface to all interfaces on the line card or
visa-versa.
c Refresh the view.
b Change the counters displayed from Packets on the interface to Bytes.
r Change the [delta] column from change in the number of packets/bytes in the last
interval to rate per second.