Command Reference Guide

542 | High Availability (HA)
www.dell.com | support.dell.com
Related
Commands
redundancy synchronize
c e
Manually synchronize data once between the Primary RPM and the Secondary RPM.
Syntax
redundancy synchronize [full | persistent-data | system-data]
Parameters
Defaults
Not configured.
Command Modes
EXEC Privilege
Command
History
show patch
e
Display the system patches loaded with the In-Service Modular Hot Fix Command.
Syntax
show patch
Command Modes
EXEC
Command
History
Related
Commands
show processes restartable
e
Display the processes and tasks configured for restartability.
Syntax
show processes restartable [history]
show sfm Display the SFM status
show switch links Display the switch fabric backplane or internal status.
full
Enter the keyword full to synchronize all data.
persistent-data
Enter the keywords persistent-data to synchronize the startup
configuration between RPMs.
system-data
Enter the keywords system-data to synchronize persistent-data and the
running configuration file, event log, SFM and line card states.
Version 8.3.12.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series
Version 8.3.12.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on E-Series
patch flash://
RUNTIME_PATCH_DIR
Insert an In-Service Modular Hot-Fix patch.