Command Reference Guide

532 | GARP VLAN Registration (GVRP)
www.dell.com | support.dell.com
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS#show garp timers
GARP Timers Value (milliseconds)
----------------------------------------
Join Timer 200
Leave Timer 600
LeaveAll Timer 10000
FTOS#
Related
Commands
show gvrp
c e s
Display the GVRP configuration.
Syntax
show gvrp [brief | interface]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on C, E, and S-Series
garp timers Set the intervals (in milliseconds) for sending GARP messages.
brief
(OPTIONAL) Enter the keyword brief to display a brief summary of the GVRP
configuration.
interface (OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword FastEthernet followed by
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a Port Channel interface, enter the keyword port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed
by the slot/port information.