Command Reference Guide

File Management |51
Command Modes
EXEC Privilege
Command
History
• mac for the current MAC ACL configuration
•
mac-address-table for the current MAC configuration
• management-route for the current Management port forwarding configuration
• mld for the current MLD configuration
• monitor for the current Monitor configuration
• mroute for the current Mroutes configuration
• msdp for the current MSDP configuration
• ntp for the current NTP configuration
• ospf for the current OSPF configuration
• pim for the current PIM configuration
• policy-map-input for the current input policy map configuration
• policy-map-output for the current output policy map configuration
• po-failover-group for the current Port-channel failover-group configuration
• prefix-list for the current prefix-list configuration
• privilege for the current privilege configuration
• qos-policy-input for the current input qos policy configuration
• qos-policy-output for the current output qos policy configuration
•
radius for the current RADIUS configuration
• redirect-list for the current redirect-list configuration
• redundancy for the current RPM redundancy configuration
• resolve for the current DNS configuration
• rip for the current RIP configuration
• rmon for the current RMON configuration
• route-map for the current route map configuration
• sflow for the current sFlow configuration
• snmp for the current SNMP configuration
• spanning-tree for the current spanning tree configuration
• static for the current static route configuration
• status for the file status information
• tacacs+ for the current TACACS+ configuration
• tftp for the current TFTP configuration
• trace-group for the current trace-group configuration
• trace-list for the current trace-list configuration
• uplink-state-group for the uplink state group configuration
• users for the current users configuration
• vlt for the current VLT configuration
• wred-profile for the current wred-profile configuration
config
ured
(OPTIONAL) Enter the keyword configuration to display line card interfaces with
non-default configurations only.
status
(OPTIONAL) Enter the keyword status to display the checksum for the running
configuration and the start-up configuration.
Version 7.8.1.0 Added hardware-monitor option
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Expanded to include last configuration change and start-up last updated (date
and time) and who made the change
Version 6.5.4.0 Added status option