Command Reference Guide

50 | File Management
www.dell.com | support.dell.com
Parameters
entity
(OPTIONAL) Enter one of the keywords listed below to display that entity’s current
(non-default) configuration. Note that, if nothing is configured for that entity, nothing is
displayed and the prompt returns:
•
aaa for the current AAA configuration
• acl for the current ACL configuration
•
arp for the current static ARP configuration
• as-path for the current AS-path configuration
• bfd for the current BFD configuration
• bgp for the current BGP configuration
• boot for the current boot configuration
• cam-profile for the current CAM profile in the configuration.
• class-map for the current class-map configuration
• community-list for the current community-list configuration
• ecmp-group for the current ECMP group configuration
• ethernet
for the current Ethernet CFM configuration
• fefd for the current FEFD configuration
•
ftp for the current FTP configuration
• frrp for the current FRRP configuration
• fvrp for the current FVRP configuration
• gvrp for the current GVRP configuration
• hardware-monitor for hardware-monitor action-on-error settings
• host for the current host configuration
• hypervisor for the current hypervisor configuration
• igmp for the current IGMP configuration
• interface for the current interface configuration
• ip for the current IP configuration
• isis for the current ISIS configuration
• line for the current line configuration
• lldp for the current LLDP configuration
• load-balance for the current port-channel load-balance configuration
• logging for the current logging configuration