Command Reference Guide

484 | Dynamic Host Configuration Protocol (DHCP)
www.dell.com | support.dell.com
netbios-name-server
c s
Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of
preference, that are available to Microsoft Dynamic Host Configuration Protocol (DHCP)
clients.
Syntax
netbios-name-server
address [address2...address8]
Parameters
Command Mode
DHCP <POOL>
Default
None
Command
History
netbios-node-type
c s
Specify the NetBIOS node type for a Microsoft DHCP client. Dell Force10 recommends
specifying clients as hybrid.
Syntax
netbios-node-type
type
Parameters
Command Mode
DHCP <POOL>
Default
Hybrid
Command
History
network
c s
Specify the range of addresses in an address pool.
Syntax
network network
/prefix-length
Parameters
address
Enter the address of the NETBIOS name server. You may enter up to 8, in
order of preference.
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
type
Enter the NETBIOS node type.
Broadcast: Enter the keyword b-node.
Hybrid: Enter the keyword h-node.
Mixed: Enter the keyword m-node.
Peer-to-peer: Enter the keyword p-node.
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
network /prefix-length
Specify a range of addresses.
Prefix-length Range: 17-31