Command Reference Guide

Dynamic Host Configuration Protocol (DHCP) | 481
default-router
c s
Assign a default gateway to clients based on address pool.
Syntax
default-router
address [address2...address8]
Parameters
Command Mode
DHCP <POOL>
Default
None
Command
History
disable
c s
Disable DHCP Server.
DHCP Server is disabled by default. Enable the system to be a DHCP server using the
no
form of the
disable command.
Syntax
disable
Command Mode
CONFIGURATION
Default
Disabled
Command
History
dns-server
c s
Assign a DNS server to clients based on address pool.
Syntax
dns-server address
[address2...address8]
Parameters
Command Mode
DHCP <POOL>
Default
None
address
Enter the a list of routers that may be the default gateway for clients on the subnet.
You may specify up to 8. List them in order of preference.
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
Version 8.3.7.0 Introduced on S4810
Version 8.2.1.0 Introduced on C-Series and S-Series.
address
Enter the a list of DNS servers that may service clients on the subnet. You may list up
to 8 servers, in order of preference.