Command Reference Guide

434 | Content Addressable Memory (CAM)
www.dell.com | support.dell.com
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 2 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 8 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 13 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
FTOS#
Usage
Information
If the IPv4Flow sub-region has been changed, this command displays the current IPv4Flow
configuration in one column and in the other column displays the IPv4Flow configuration
that will be loaded after the next reboot.
Related
Commands
CAM Layer 2 ACL Commands
IPv4Flow sub-partitions are supported on the E-Series TeraScale platform e
t
The CAM Layer 2 ACL commands are:
• cam l2acl (EXEC Privilege)
• cam-l2acl (CONFIGURATION)
• show cam-l2acl
The 18-megabit user configurable CAM is divided into multiple regions such as Layer 2 FIB,
Layer 3 FIB, IPv4Flow, IPv4 Ingress ACL, etc. The Layer 2 ACL region is further
sub-divided into 6 regions: Sysflow, L2ACL, PVST, QoS, L2PT, FRRP.
cam-ipv4flow
(CONFIGURATION)
Configure the amount of CAM space in IPv4flow sub-regions.