Command Reference Guide

Bare Metal Provisioning | 413

Bare Metal Provisioning

Overview

Bare Metal Provisioning is supported on platforms: z

Bare Metal Provisioning version 2.0 is supported on S4810 and z switches.

In a data center network, Bare Metal Provisioning (BMP) automates the configuration and

updating of switches, ensuring standard configurations across installed devices.

You can configure auto-configuration on a single switch or on multiple switches. BMP allows

you to set up a stack with a minimum of effort, but is also useful for quick configuration of a

single switch.

For additional information on BMP in an auto-configuration mode, refer to the

Open

Automation Guide.

BMP 2.0 eases configuration by providing the following key features:

• Boot images and running configurations are specified in a DHCP server.

• Files are automatically downloaded from a file server and applied by the switch

• Switch access is allowed through all ports (management and user ports) with or

without DHCP-based dynamic IP address configuration of a switch.

• Booting up in Layer 3 mode with interfaces already in no shutdown mode and

only enabling some basic protocols enabled to protect the system and the network

Commands

• reload-type

• show reload-type

• stop jump-start

reload-type

BMP 2.0 auto-configuration mode: Configure a switch to reload in normal mode or as a

DHCP client with all ports configured for Layer 3 traffic.