Command Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 377
Command
History
show running-config bgp
c e s
Use this feature to display the current BGP configuration.
Syntax
show running-config bgp
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
Up/Down Displays the amount of time that the neighbor is in the Established stage.
If the neighbor has never moved into the Established stage, the word
never is displayed.
The output format is:
Time Established----------Display Example
< 1 day ----------------------- 00:12:23 (hours:minutes:seconds)
< 1 week --------------------- 1d21h (DaysHours)
> 1 week --------------------- 11w2d (WeeksDays)
State/Pfxrcd If the neighbor is in Established stage, the number of network prefixes
received.
If a maximum limit was configured with the neighbor maximum-prefix
command, (prfxd) appears in this column.
If the neighbor is not in Established stage, the current stage is displayed
(Idle, Connect, Active, OpenSent, OpenConfirm) When the peer is
transitioning between states and clearing the routes received, the phrase
(Purging) may appear in this column.
If the neighbor is disabled, the phrase (Admin shut) appears in this
column.
Table 9-16. Command Example fields: show ip bgp summary
Field Description
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on S-Series
Version 7.7.1.0 Introduced on C-Series
Version 7.6.1.0 Introduced on E-Series