Command Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 367
*> 70.70.27.0/24 100.10.10.2 0 0 0 100 200 ?
*> 70.70.28.0/24 100.10.10.2 0 0 0 100 200 ?
*> 70.70.29.0/24 100.10.10.2 0 0 0 100 200 ?
FTOS#
Example
(show ip bgp
neighbors
denied-routes)
FTOS#show ip bgp neighbors 100.10.10.2 denied-routes
4 denied paths using 205 bytes of memory
BGP table version is 34, local router ID is 100.10.10.2
Status codes: s suppressed, S stale, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
D 70.70.21.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.22.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.23.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.24.0/24 100.10.10.2 0 0 100 200 ?
FTOS#
Table 9-9. Command Example fields: show ip bgp neighbors
Lines beginning with Description
BGP neighbor Displays the BGP neighbor address and its AS number. The
last phrase in the line indicates whether the link between the
BGP router and its neighbor is an external or internal one. If
they are located in the same AS, then the link is internal;
otherwise the link is external.
BGP version Displays the BGP version (always version 4) and the remote
router ID.
BGP state Displays the neighbor’s BGP state and the amount of time in
hours:minutes:seconds it has been in that state.
Last read This line displays the following information:
• last read is the time (hours:minutes:seconds) the router read
a message from its neighbor
• hold time is the number of seconds configured between
messages from its neighbor
• keepalive interval is the number of seconds between
keepalive messages to help ensure that the TCP session is
still alive.
Received messages This line displays the number of BGP messages received, the
number of notifications (error messages) and the number of
messages waiting in a queue for processing.
Sent messages The line displays the number of BGP messages sent, the
number of notifications (error messages) and the number of
messages waiting in a queue for processing.
Received updates This line displays the number of BGP updates received and
sent.
Soft reconfiguration This line indicates that soft reconfiguration inbound is
configured.
Minimum time Displays the minimum time, in seconds, between
advertisements.