Command Reference Guide

318 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Usage
Information
To view information on both incoming and outgoing routes, do not include the in and out
parameters in the debugging command. The
in and out parameters cancel each other; for
example, if you enter
debug ip bgp in and then enter debug ip bgp out, you will not see
information on the incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related
Commands
Command
History
debug ip bgp dampening
c e s
Display information on routes being dampened.
Syntax
debug ip bgp dampening [in | out]
To disable debugging, enter
no debug ip bgp dampening.
Parameters
Command Modes
EXEC Privilege
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Related
Commands
in (OPTIONAL) Enter the keyword in to view only information on
inbound BGP routes.
out
(OPTIONAL) Enter the keyword out to view only information on
outbound BGP routes.
debug ip bgp events View information about BGP events.
debug ip bgp keepalives View information about BGP keepalives.
debug ip bgp notifications View information about BGP notifications.
debug ip bgp updates View information about BGP updates.
show debugging View enabled debugging operations.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
in (OPTIONAL) Enter the keyword in to view only inbound dampened routes.
out
(OPTIONAL) Enter the keyword out to view only outbound dampened
routes.
show debugging View enabled debugging operations.
show ip bgp dampened-paths View BGP dampened routes.