Command Reference Guide

30 | File Management
www.dell.com | support.dell.com
• format flash (Z9000)
• logging coredump
• logging coredump server
• pwd
• rename
• boot system
• show bootvar
• show file
• show file-systems
• show linecard
• show os-version
• show running-config
• show startup-config
• show version
• upgrade (E-Series version)
• upgrade (C-Series version)
• upgrade (S-Series management unit and Z9000)
• upgrade fpga-image
boot config
ce
Set the location and name of the configuration file that is loaded at system start-up (or reload)
instead of the default startup-configuration.
Syntax
boot config {remote-first | rpm0 file-url | rpm1 file-url}
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
To display these changes in the show bootvar command output, you must save the running
configuration to the startup configuration (copy running-config startup-config or write)......
remote-first
Enter the keywords remote-first to attempt to load the boot configuration files
from a remote location.
rpm0
Enter the keywords rpm0 first to specify the local boot configuration file for RPM 0.
rpm1
Enter the keywords rpm1 first to specify the local boot configuration file for RPM 1.
file-url
Enter the location information:
• For a file on the internal Flash, enter flash:// followed by the filename.
• For a file on the external Flash, enter slot0:// followed by the filename.
Version 7.5.1.0 Introduced on C-Series
E-Series original Command