Command Reference Guide

264 | Access Control Lists (ACL)
www.dell.com | support.dell.com
set local-preference
c e s
Configure a filter to set the BGP LOCAL_PREF attribute for routers within the local
autonomous system.
Syntax
set local-preference value
Parameters
Defaults
Not configured
Command Modes
ROUTE-MAP
Command
History
Usage
Information
The set local-preference command changes the LOCAL_PREF attribute for routes meeting
the route map criteria. To change the LOCAL_PREF for all routes, use the
bgp default
local-preference command.
Related
Commands
set metric
c e s
Configure a filter to assign a new metric to redistributed routes.
Syntax
set metric [+ | -] metric-value
To delete a setting, enter
no set metric.
Parameters
Defaults
Not configured
Command Modes
ROUTE-MAP
value
Enter a number as the LOCAL_PREF attribute value.
Range: 0 to 4294967295
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
bgp default local-preference Change default LOCAL_PREF attribute for all routes.
+ (OPTIONAL) Enter + to add a metric-value to the redistributed routes.
- (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes.
metric-value
Enter a number as the new metric value.
Range: zero (0) to 4294967295