Command Reference Guide

Access Control Lists (ACL) | 263
Command
History
Related
Commands
set level
c e s
Configure a filter to specify the IS-IS level or OSPF area to which matched routes are
redistributed.
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
Parameters
Defaults
Not configured.
Command Modes
ROUTE-MAP
Command
History
Related
Commands
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
ip community-list Configure a Community access list.
match community Redistribute routes that match a BGP COMMUNITY attribute.
neighbor send-community Assign the COMMUNITY attribute.
show ip bgp community Display BGP community groups.
show ip community-lists Display configured Community access lists.
backbone
Enter the keyword backbone to redistribute matched routes to the OSPF
backbone area (area 0.0.0.0).
level-1
Enter the keyword level-1 to redistribute matched routes to IS-IS Level 1.
level-1-2
Enter the keyword level-1-2 to redistribute matched routes to IS-IS Level 1 and
Level 2.
level-2
Enter the keyword level-2 to redistribute matched routes to IS-IS Level 2.
stub-area
Enter the keyword stub to redistributed matched routes to OSPF stub areas.
Version 8.3.7.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
set automatic-tag Compute the tag value of the route.
set metric Specify the metric value assigned to redistributed routes.
set metric-type Specify the metric type assigned to redistributed routes.
set tag Specify the tag assigned to redistributed routes.