Command Reference Guide

Access Control Lists (ACL) | 241
Parameters
Defaults
No default configuration
Command Modes
CONFIGURATION
Command
History
Usage
Information
The number of entries allowed per ACL is hardware-dependent. Refer to your line card
documentation for detailed specification on entries allowed per ACL.
Prior to 7.8.1.0, names are up to 16 characters long.
Example
FTOS(conf)#mac-access-list access-list extended TestMATExt
FTOS(config-ext-macl)#remark 5 IPv4
FTOS(config-ext-macl)#seq 10 permit any any ev2 eq 800 count bytes
FTOS(config-ext-macl)#remark 15 ARP
FTOS(config-ext-macl)#seq 20 permit any any ev2 eq 806 count bytes
FTOS(config-ext-macl)#remark 25 IPv6
FTOS(config-ext-macl)#seq 30 permit any any ev2 eq 86dd count bytes
FTOS(config-ext-macl)#seq 40 permit any any count bytes
FTOS(config-ext-macl)#exit
FTOS(conf)#do show mac accounting access-list snickers interface g0/47 in
Extended mac access-list snickers on GigabitEthernet 0/47
seq 10 permit any any ev2 eq 800 count bytes (559851886 packets 191402152148 bytes)
seq 20 permit any any ev2 eq 806 count bytes (74481486 packets 5031686754 bytes)
seq 30 permit any any ev2 eq 86dd count bytes (7751519 packets 797843521 bytes)
Related
Commands
permit
c e s
Configure a filter to pass packets matching the criteria specified.
Syntax
permit {any | host mac-address | mac-source-address mac-source-address-mask} {any | host
mac-address | mac-destination-address mac-destination-address-mask} [ethertype operator] [count
[
byte]] | [log] [monitor]
To remove this filter, you have two choices:
access-list-name
Enter a text string as the MAC access list name, up to 140 characters.
Version 8.3.10.0 Introduced on S4810
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
mac access-list standard Configure a standard MAC access list.
show mac accounting access-list Display MAC access list configurations and counters (if
configured).