Command Reference Guide

Access Control Lists (ACL) | 181

Access Control Lists (ACL)

Overview

Access Control Lists (ACLs) are supported by FTOS on all Dell Force10 platforms, as

indicated by the characters that appear under each of the command headings:

e E-Series,

c C-Series, s S-Series, or .

FTOS supports the following types of Access Control List (ACL), IP prefix list, and route

map:

• Commands Common to all ACL Types

• Common IP ACL Commands

• Standard IP ACL Commands

• Extended IP ACL Commands

• Common MAC Access List Commands

• Standard MAC ACL Commands

• Extended MAC ACL Commands

• IP Prefix List Commands

• Route Map Commands

• AS-Path Commands

• IP Community List Commands

Commands Common to all ACL Types

The following commands are available within each ACL mode and do not have

mode-specific options. Some commands may use similar names, but require different options

to support the different ACL types (for example, deny).

• description

• remark

Note: For ACL commands used in the Trace function, refer to the section Trace List

Commands in the chapter Security.

Note: For IPv6 ACL commands, refer to Access Control Lists (ACL).