Command Reference Guide

S-Series Debugging and Diagnostics | 1521
Example
(Per Stack Unit
buffer statistics)
FTOS(conf)#sh hardware stack-unit 0 buffer total-buffer
FTOS#sh hardware stack-unit 0 buffer total-buffer
----- Buffer Details for Stack-Unit 0 -----
Total Buffers allocated per Stack-Unit 46080
Example
(Per Port buffer
statistics for
specific port)
FTOS(conf)#sh hardware stack-unit 0 buffer unit 0 port 1 buffer-info
----- Buffer Stats for Unit 0 Port 1 -----
Maximum Shared Limit for the Port: 30720
Default Packet Buffer allocate for the Port: 120
Used Packet Buffer for the Port: 0
Example
(Queue buffer
statistics)
FTOS(conf)#sh hardware stack-unit 0 buffer unit 0 port 1 queue 2 buffer-info
----- Buffer Stats for Unit 0 Port 1 Queue 2 -----
Maximum Shared Limit: 30720
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
Related
Commands
show hardware system-flow
s
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow layer2 stack-unit 0-7 port-set 0-1 [counters]
Parameters
Defaults
No default behavior
Command Modes
EXEC Privilege
clear hardware system-flow Clear statistics from selected hardware components.
show interfaces stack-unit Display information on all interfaces on a specific S-Series stack
member.
show processes cpu
(S-Series)
Display CPU usage information based on processes running in an
S-Series.
show system stack-ports Display information about the stacking ports on all switches in the
S-Series stack.
show system (S-Series and
S4810)
Display the current status of all stack members or a specific
member.
acl | qos For the selected stack member and stack member port-pipe, display which
system flow entry the packet hits and what queue the packet takes as it dumps
the raw system flow tables.
stack-unit 0-7 Enter the keyword stack-unit followed by 0 to 7 to select a stack member ID.
port-set 0-1
[counters]
Enter the keyword port-set with a port-pipe number — 0 or 1. The S25
models of the S-Series have only port-pipe 0.
(OPTIONAL) Enter the keyword counters to display hit counters for the
selected ACL or QoS option.