Command Reference Guide
Virtual Router Redundancy Protocol (VRRP) | 1503
Example
FTOS#show vrrp ipv6
------------------
GigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net: fe80::201:e8ff:fe7a:6bb9
VRF: 0 default-vrf
State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9 (local)
Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec
Accept Mode: FALSE, Master AdvInt: 100 centisec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64
Virtual MAC address:
00:00:5e:00:02:ff
Virtual IP address:
1::255 fe80::255
Table 58-3. Command Example Description: show vrrp ipv6
Line Beginning
with Description
GigabitEthernet... Displays the Interface, the VRRP group ID, and the network address.
If the interface is no sending VRRP packets, 0.0.0.0 appears as the network
address.
VRF VRF instance to which the interface (on which the VRRP group is configured)
belongs
State: master... Displays the interface’s state:
• Na/If (not available),
• master (MASTER virtual router)
• backup (BACKUP virtual router)
the interface’s priority and the IP address of the MASTER.
Hold Down:... This line displays additional VRRP configuration information:
• Hold Down displays the hold down timer interval in seconds.
• Preempt displays TRUE if preempt is configured and FALSE if preempt
is not configured.
• AdvInt displays the Advertise Interval in seconds.
Adv rcvd:... This line displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements received on the
interface.
• Adv sent displays the number of VRRP advertisements sent on the
interface.
• Bad pkts rcvd displays the number of invalid packets received on the
interface.
Virtual MAC address Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the VRRP router to which the interface is
connected.
Tracking states... Displays information on the tracked interfaces or objects configured for a
VRRP group (track command), including:
• UP or DOWN state of the tracked interface or object (Up or Dn)
• Interface type and slot/port or object number, description, and time since
the last change in the state of the tracked object
• Cost to be subtracted from the VRRP group priority if the state of the
tracked interface/object goes DOWN










