Command Reference Guide

1494 | Virtual Router Redundancy Protocol (VRRP)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS>Interface Grp Pri Pre State Master addr Virtual addr(s)
Description------------------------------------------------------------------------------
Gi 10/37 1 100 Y Master 200.200.200.200 200.200.200.201
Gi 10/37 2 100 Y Master 200.200.200.200 200.200.200.202 200.200.200.203 Description
Gi 10/37 3 100 Y Master 1.1.1.1 1.1.1.2
Gi 10/37 4 100 Y Master 200.200.200.200 200.200.200.206 200.200.200.207 ... short desc
Gi 10/37 254 254 Y Master 200.200.200.200 200.200.200.204 200.200.200.205
FTOS>
vrrp-id
(OPTIONAL) Enter the Virtual Router Identifier for the VRRP group to view
only that group.
Range: 1 to 255.
interface
(OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For Port Channel interface types, enter the keyword
port-channel followed
by the number:
C-Series and S-Series Range: 1 to 128
E-Series Range: 1 to 255 for TeraScale
• For SONET interfaces, enter the keyword sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a VLAN interface, enter the keyword vlan followed by the VLAN ID.
The VLAN ID range is from 1 to 4094.
brief
(OPTIONAL) Enter the keyword brief to view a table of information on the
VRRP groups on the E-Series.
Version 8.3.7.0 Introduced on S4810
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
Table 58-1. Command Example Descriptions: show vrrp brief
Item Description
Interface Lists the interface type, slot and port on which the VRRP group is
configured.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface.
If the track command is configured to track that interface and the
interface is disabled, the cost is subtracted from the priority value
assigned to the interface.
Pre States whether preempt is enabled on the interface.
• Y = Preempt is enabled.
• N = Preempt is not enabled.