Command Reference Guide

VLAN Stacking | 1453
Command
History
Example
FTOS#show interface dei-honor
Default Drop precedence: Green
Interface CFI/DEI Drop precedence
-------------------------------------------------------------
Gi 0/1 0 Green
Gi 0/1 1 Yellow
Gi 8/9 1 Red
Gi 8/40 0 Yellow
Related
Commands
show interface dei-mark
c s
Display the dei mark configuration.
Syntax
show interface dei-mark
[interface slot/port | linecard number port-set number]
Parameters
Command Mode
EXEC Privilege
Command
History
Example
FTOS#show interface dei-mark
Default CFI/DEI Marking: 0
Interface Drop precedence CFI/DEI
------------------------------------------------
Gi 0/1 Green 0
Gi 0/1 Yellow 1
Gi 8/9 Yellow 0
Gi 8/40 Yellow 0
Related
Commands
sh
stack-unit stack-group
Configure stacking group specified by ID.
Syntax
[no] stack-unit unit-id stack-group stack-group-id
Version 8.3.1.0 Introduced on C-Series and S-Series.
dei honor Honor the incoming DEI value by mapping it to an FTOS drop
precedence. You may enter the command once for 0 and once for 1.
interface slot/port Enter the interface type followed by the line card slot and port
number.
linecard number port-set
number
Enter linecard followed by the line card slot number, then enter
port-set followed by the port-pipe number.
Version 8.3.1.0 Introduced on C-Series and S-Series.
dei mark Set the DEI value on egress according to the color currently assigned to
the packet.