Command Reference Guide

Control and Monitoring | 145
ssh-peer-rpm
c e
Open an SSH connection to the peer RPM.
Syntax
ssh-peer-rpm [-l username]
Parameters
Defaults
Not configured.
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
This command is not available when the peer RPMs are running different FTOS releases.
telnet
c e s
Connect through Telnet to a server. The Telnet client and server in FTOS support IPv4 and
IPv6 connections. You can establish a Telnet session directly to the router, or a connection can
be initiated from the router.
Syntax
telnet {host | ip-address | ipv6-address | vrf vrf instance name} [source-interface]
Parameters
-l username (OPTIONAL) Enter the keyword -l followed by your user name.
Default: The user name associated with the terminal
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
Version 6.3.1.0 Introduced on E-Series
host (OPTIONAL) Enter the name of a server.
ip-address (OPTIONAL) E-Series only. Enter the IPv4 address to which you are
testing connectivity in dotted decimal format of the server.
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format.
Range: /0 to /128
Note: The :: notation specifies successive hexadecimal fields of zeros