Command Reference Guide

System Time and Date | 1447
Related
Commands
Table 53-2. show ntp status Command Example Information
Field Description
“Clock is...” States whether or not the switch clock is
synchronized, which NTP stratum the system is
assigned and the IP address of the NTP peer.
“frequency is...” Displays the frequency (in ppm), stability (in
ppm) and precision (in Hertz) of the clock in this
system.
“reference time is...” Displays the reference time stamp.
“clock offset is...” Displays the system offset to the synchronized
peer and the time delay on the path to the NTP
root clock.
“root dispersion is...” Displays the root and path dispersion.
“peer mode is...” State what NTP mode the switch is. This should
be client mode.
show ntp associations Display information on NTP master and peer
configurations.